NitroTek
F-14 TOMCAT JOLLY ROGERS 6CH EDF TWIN TOP GUN JET
| 1100mm | |
| 1086mm | |
| 1100-1300g | |
| 2.4G 6Ch Tx and 6 Ch Rx | |
| Powerful 2430 outer runner brushless motor | |
| 45A ESC 5A UBEC | |
| 3200Mah, 11.1V.Li-Po | |
| 1000m |
- ,
- Twin 60mm ducted fan ,
- With variable sweep wing, retract system ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Working swing wings ,
- Retractable landing gear ,
- Stunning paintwork ,
- Twin 60mm electric ducted fans ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Powerful batteries ,
- Approx 15min flight time ,
NitroTek
F 18E TIGER 64MM 4CH EDF RTF RC JET - 2.4GHZ
| 686mm | |
| 980mm | |
| 560g | |
| 10dm² | |
| 56g/dm² | |
| 4Ch Tx and 6 Ch Rx | |
| Powerful 15L inner runner brushless motor and 25A ESC | |
| 3 Cell Li-Po Battery,1300 mAh,11.1V | |
| 1000m |
- ,
- Four 9 gram servos ,
- ,
- Pre-painted foam fuselage & wings ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
NitroTek
F-117 NIGHTHAWK STEALTH 70MM 5CH EDF JET 2.4GHZ
| 734mm | |
| 1100mm | |
| 980g | |
| 2.4G 5Ch Tx and 6 Ch Rx | |
| 2836 outer runner brushless motor | |
| 45A ESC 5A UBEC | |
| 4 Cell Li-Po, 2200mAh,14.8V | |
| 4S Charger | |
| 1000m. |
- ,
- 70mm Ducted fan ,
- Seven 9g servos, one 17g servo ,
- Automatic landing gear system ,
- Steering front landing gear ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Automatic landing gear ,
- Stunning paintwork ,
- 70mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Powerful batteries ,
- Approx 15min flight time ,
NitroTek
A-10 WARTHOG 64MM 5CH EDF TWIN RC JET - 2.4GHZ
| 1030mm | |
| 949mm | |
| 5Ch Tx and 6 Ch Rx | |
| 2500 mAh,11.1V | |
| 1000m |
- ,
- Twin 64mm EDF, twin ESC, twin Motor ,
- 8 servos ,
- Brushless motor and 25A ESC ,
- Suspension electric retract system ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Retractable landing gear ,
- Stunning paintwork ,
- Twin 64mm electric ducted fans ,
- State of the art components2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Powerful batteries ,
- Approx 15min flight time ,
NitroTek
F9F PANTHER 64MM 4CH RC EDF FIGHTER JET - 2.4GHZ
| 770mm | |
| 793mm | |
| 520g | |
| 4Ch Tx and 6 Ch Rx , | |
| 1300Mah, 11.1V | |
| 1000m |
- ,
- Four 9 gram servos ,
- 64mm Ducted fan ,
- Brushless motor and 25A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- Capable of over 90mph ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Is capable of the 'Cobra Manoeuvre' ,
- Approx 15min flight time ,
NitroTek
HE 162 SALAMANDER 64MM RC EDF FIGHTER JET - 2.4GHZ
| 790mm | |
| 988mm | |
| 600g | |
| 47g/dm² | |
| 12.8dm² | |
| 4Ch Tx and 6 Ch Rx | |
| 3 Cell Li-Po ,1300 mAh,11.1V | |
| 1000m |
- ,
- Four 9 gram servos Brushless motor ,
- 25A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fans ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
NitroTek
F-35 LIGHTNING II 64MM RC EDF RTF JET - 2.4GHZ
| 608mm | |
| 840mm | |
| 600g | |
| 57g/dm2 | |
| 8.7dm2 | |
| 4Ch TX and 6 Ch Rx, | |
| 3 Cell Li-Po, 1300 mAh, 11.1V | |
| 1000m |
- ,
- 9 gram servos ,
- Brushless motor and 25A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Is capable of the 'Cobra Manoeuvre' ,
NitroTek
F 18E JOLLY ROGERS RC EDF JET 2.4G 64MM
| 686mm | |
| 980mm | |
| 560g | |
| 10dm² | |
| 56g/dm² | |
| 4Ch Tx and 6 Ch Rx | |
| Powerful 15L inner runner brushless motor and 25A ESC | |
| 3 Cell Li-Po Battery,1300 mAh,11.1V | |
| 1000m |
- ,
- Four 9 gram servos ,
- ,
- Pre-painted foam fuselage & wings ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- ">Can perform amazing aerobatics ,
- Is capable of the 'Cobra Manoeuvre' ,
NitroTek
MIGHTY 1/8TH SCALE NITRO POWERED PRO RC TRUGGY
| 195mm | |
| 570mm | |
| 440mm | |
| 355mm | |
| 370mm | |
| 40mm | |
| 13.1 | |
| 3950g | |
| 2 channel |
- ,
- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- High-downforce wing; ,
The stunning ACME Mighty is a fully built, fully featured, ...
NitroTek
HSP GLADIATOR 1/10TH SCALE NITRO OFF ROAD TRUGGY
| 400mm | |
| 160mm | |
| 300mm | |
| 275mm | |
| 5.84 | |
| 35mm | |
| 105mm | |
| Stick type | |
| Infinity .18 |
- ,
- ,
- Four wheel drive system ,
- Hi-spec easy maintenance diffs ,
- 6061/T6 anodized aluminum chassis ,
- 13.8g lightweight aluminum flywheel ,
- Disc brake system ,
- Extra large 75cc leak proof fuel tank ,
- Hard wearing truggy tyres ,
- Top quality 1/10th scale wheel rims ,
- Oil filled shock absorbers ,
- High flow dual foam element air filter ,
- 5-position adjustment on tower ,
- Camber, toe in/out adjustment ,
- 3mm shock towers, oil-pressured ,
- Composite lower arms, C-hub front arms, and turnbuckle upper links ,
- Front and rear bumpers ,
NitroTek
WALKERA HM COMANCHE CO-AXIAL 4CH RC HELICOPTER
| 410 mm | |
| 410 mm | |
| Built-in | |
| 2*180PH | |
| RX-2403D | |
| 269g (Battery included) | |
| WK-2402 | |
| 7.4V 800mAh Li-Po | |
| 336 mm |
- ,
- Servo: WK-7.6-3 ;weight 8.4g ;speed 0.12sec/60o(4.8V) ;torque 1.4kgf.cm(4.8V) ;dimension 22.5X11.5X24mm ,
- ,
- CNC-machined metal rotor head and coaxial format, with state-of-the-art workmanship. ,
- New 2.4G spread spectrum technology, with the functions of automatic code pairing and ID assignment. Allows many RC helis to fly in the same field at the same time. ,
- It utilizes the 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment. ,
- High performance 2 x 180PH motor, powered by 7.4V 800mAh Lipo, offers 10-to 12-minute flight time, depending on the flight modes. ,
NitroTek
ESKY CO-COMANCHE 4CH RC HELICOPTERS- 2.4GHZ VERSION
| 340mm | |
| 242g | |
| 435mm,width | |
| 180 motor*2 | |
| 4CH (including training switch and simulator port. 2.4 Ghz | |
| (8g,1.3kg.CM,0.12s/60¡) | |
| 7.4V 800mAh Li-polymer battery |
- ,
- RTF ,
- 4 in 1 mix controller (W/gyro,mixer,ESC,receiver) ,
- ,
- Novel and distinct sculpt with high emulation art ,
- Designed for beginner and is suitable for indoor flight ,
- Lifter pulley and culvert tail rotor design ensure a more enjoyable flight ,
- Airline operation with graceful movements and sensitive reaction ,
- RTF after unwrapping the packing and fixing the battery and dispense with debugging ,
,
Flight simulator software and cable are included as well as four spare blades
, The Co-Comanche is one of the coolest looking helicopter RC ...NitroTek
COPTERX SE V2 PRO RC HELICOPTER - RTF VERSION
| 650mm | |
| 230mm | |
| 700mm | |
| 150mm | |
| 13T/11T | |
| 150T | |
| 106T | |
| 25T | |
| 354g | |
| 690g |
- ,
- Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24 ,
- ,
- CNC & Carbon Construction ,
- Auto-Rotation System ,
- Rear Tail Servo Mount ,
- Collective Pitch System ,
- Tail Rotor Drive Belt System ,
- Main Drive Gear with Cooling Fan ,
- Professional Servo Control Lever Design ,
NitroTek
SHENGQI 1/5TH PETROL RC MONSTER TRUCKS - HUMMER 2.4GHZ
petrol rc Trucks are beasts with a massive feature ..." />
| 1/5 | |
| Rear 2WD system, differential with built-in gears | |
| Rear Disc | |
| 80km/h | |
| Single cylinder, two stroke, air-cooled, 23cc | |
| 1.8N.m | |
| 1.58kw / 2.15 bhp | |
| Petrol / engine oil (25 | |
| 40 minutes | |
| pull start | |
| 700x530x350mm | |
| 190mm | |
| 480mm | |
| 340mm(F)/370mm(R) |
- ,
- ,
- Fully assembled petrol RC Truck ,
- Powerful pull start 23cc petrol engine ,
- Heavy duty parts (many metal) ,
- Differential with built-in gear ,
- Fully adjustable oil-filled shocks ,
- Disc brake system ,
- CE/ROHS approved rc controller ,
- Strong 15kg/cm OEM Futaba servo ,
- Sealed electronics box for use on wet days ,
- Aluminium chassis ,
- Waibro Carburetor ,
- NGK spark plug ,
- 2.4G rc radio equipment ,
- 80 km/h - petrol trucks top speed ,
ShengQi petrol rc Trucks are beasts with a massive feature ...
NitroTek
WARRIOR 4WD BUGGY- PRO VERSION WITH REMOTE STARTER
| 185mm | |
| 505mm | |
| 310mm | |
| 315~320mm | |
| 310mm | |
| 30mm | |
| 3300g | |
| 2 channel |
- ,
A remote start upgrade is available as an option.
, ,- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Four wheel drive ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Width of only 129mm; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- Adjustable high-downforce wing; ,
The Warrior is a fully built, fully featured, race ready, ...